83Selecting an External Device (USB)You can adjust the LCD brightness.Adjusting LCD Brightness1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [LCD] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[LCD] sub menu : DARK, NORMAL, BRIGHT5. Press the menu button twice and the menu will disappear.LCD brightnessYou can select an external device to which you want to connect the camera using the USB cable.Selecting an External Device1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [USB] menu by pressing the UP/ DOWN buttonand press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[COMPUTER] : Select this if you want to connect the camera to your PC.Refer to page 105 for instructions on how to connect the camera to yourPC.[PRINTER] : Select this if you want to connect the camera to your printer.Refer to page 70 for instructions on how to connect the camera to yourprinter.5. Press the menu button twice and the menu will disappear. SETUPLAMPSOUNDUSBBACK: SET:OKCOMPUTERPRINTER2592 SETUPSOUNDUSBLCDBACK: SET:OKDARKNORMALBRIGHT2592
