Samsung SCW-R500 User Manual

Contents

This FWT SCW-R500/R510 operates by receiving electricity from an electricaloutlet or external power supply.1 Connect the terminal mounted Antenna on the side of the terminal.2 Connect a conventional wired telephone to a RJ-11 phone port.(SCW-R500: 3 RJ-11 phone ports / SCW-R510: 2 RJ-11 phone port)Use the telephone compatible to FCC part 68 as possible, otherwise itmay not work properly.FWT works only tone dialing.3 Plug the AC adaptor output into the rear DC 9V jack of the Terminal.4 Plug the AC adaptor plug into an appropriate electrical outlet.5 Connect a G3 analog facsimile machine to a dedicated RJ-11 port.(only for SCW-R510)0 The usage of RS-232C connector on the base of the FWT is not user butdealer's maintenance.How to install External Power Supply(option)1 Connect the DC power cable to External power supply.2 Connect the DC power cable to FWT.3 Connect the AC power connector to External power supply.4 Plug the AC power connector to wall outlet.5 Connect a wired telephone to a RJ-11 phone portSetting up your terminalSETTING UP YOUR TERMINAL12 45 312453SCW-R500 1/9/99 12:06 PM Page 6