Samsung SCW-R500 User Manual

Contents

Adjusting VolumeTerminal ResetRestricting Use of the PhoneSetting Warning BeepsChanging the Lock Code• To disconnect when you’re through, replace the handset.NOTE: • Be sure the phone’s ringer is enabled.• If you heard incoming call in picking up the handset, you can receivethe call by pressing any digit key.1 First, check to see that your FWT Phone is turned on.If the Power LED is lit, that means the power is on.2 Pick up the handset.l You hear a dial tone.3 Using the number keypad, dial the desired telephone number.0 When you finish inputting phone number, you have to press button.If you don't press button, A call is not connected.4 When the other person answers, begin your conversation.5 To end the call, replace the handset.NOTE: • You can dial by 32 digit including .• You can dial emergency call by pressing and holding withoutinputting any digits.You can't change the emergency call number.MAKING CALLSThe terminal signals the telephone(s) to ring when an incoming call isdetected. Pick up the telephone handset and begin talking into themicrophone on the handset.RECEIVING CALLSAdvanced FeatureSCW-R500 1/9/99 12:06 PM Page 12