Installing Printer Software in Windows92.Configure an IP address, subnet mask, and gateway for theprinter manually and click Configure to set the specific IPaddress for the network printer.3.Click Next, and go to step to step 6.• You can also set the network printer via SyncThruTM WebService, an embedded web server. Click Launch SWS onSet IP Address window. Your machine’s embedded websiteopens.5 The list of printers available on the network appears.Select the printer you want to install from the list and thenclick Next.• If you do not see your printer on the list, click Update torefresh the list, or select Add TCP/IP Port to add yourprinter to the network. To add the printer to thenetwork, enter the port name and the IP address for theprinter.To verify your printer’s IP address or the MAC address,print a Network Configuration page.• To find a shared network printer (UNC Path), selectShared Printer [UNC] and enter the shared namemanually or find a shared printer by clicking the Browsebutton.N OTE: If you cannot find your machine in network, please turnoff the firewall and click Update.For Windows operating system, Start → Control Panel andstart windows firewall, and set this option unactivated. Forother operating system, refer to its on-line guide.6 After the installation is finished, a window appears askingyou to print a test page and to register yourself as a userof Samsung Printers in order to receive information fromSamsung. If you so desire, select the correspondingcheckbox(es) and click Finish.Otherwise, just click Finish.N OTE: After setup is complete, if your printer driver doesn’twork properly, reinstall the printer driver. See “ReinstallingPrinter Software” on page 11.Custom InstallationYou can choose individual components to install and set aspecific IP address.1 Make sure that the printer is connected to your networkand powered on. For details about connecting to thenetwork, see the supplied printer’s User’s Guide.2 Insert the supplied CD-ROM into your CD-ROM drive.The CD-ROM should automatically run, and an installationwindow appears.If the installation window does not appear, click Start andthen Run. Type X:\Setup.exe, replacing “X” with theletter which represents your drive and click OK.If you use Windows vista, Windows 7 and Windows Server2008 R2, click Start → All programs → Accessories →Run, and type X:\Setup.exe.If the AutoPlay window appears in Windows vista,Windows 7 and Windows Server 2008 R2, click RunSetup.exe in Install or run program field, and clickContinue in the User Account Control window.
