291. IntroductionInstalling the driver locallyA locally connected machine is a machine directly attached to yourcomputer using the cable. If your machine is attached to a network,skip the following steps below and go on to installing a networkconnected machine’s driver (see Advanced Guide).• If you are a Macintosh, Linux, or Unix OS user, refer to theAdvanced guide.• The installation window in this User’s Guide may differdepending on the machine and interface in use.• Selecting Advanced Installation > Custom Installationallows you to choose which programs to install.• Only use a USB cable no longer than 3 meters (118 inches). 15Windows1 Make sure that the machine is connected to your computerand powered on.If the “Found New Hardware Wizard” appears during theinstallation procedure, click Cancel to close the window.2 Insert the supplied software CD into your CD-ROM drive.Click Start > All programs > Accessories > Run.X:\Setup.exe replacing “X” with the letter, which representsyour CD-ROM drive and click OK.3 Select Install Now.4 Read the License Agreement, and select I accept the termsof the License Agreement. Then, click Next.5 Follow the instructions in the installation window.
