INSTALLING A NETWORK OPTION A.9A10 Enter a number between 0 and 255 for each byte and pressMode/Enter (Enter for SCX-5115).You can move between each byte by pressing or .11 Repeat steps 6 through 8 to configure the other TCP/IPparameters, such as subnet mask and gateway.12 When you are finished, press Stop/Clear.Dynamic Addressing (BOOTP/DHCP)To allow the server to automatically assign the TCP/IP address,take the following steps:1 Press Menu/Exit and then System Setup on the one-touch dial keypad. SCX-5115 users should press Menu andthen Enter.2 Press or to display “NETWORK SETUP” on the top line.3 Press or to display “CONFIG NETWORK” on thebottom line.4 Press Mode/Enter (Enter for SCX-5115) to access themenu.The first option, “CONFIGURE TCP” displays on the bottomline.5 Press Mode/Enter (Enter for SCX-5115) to access themenu.6 Press or to select the server to assign the TCP/IPaddress, DHCP or BOOTP.7 Press Mode/Enter (Enter for SCX-5115) to save theselection.8 When you are finished, press Stop/Clear.
