Alignment & TroubleshootingService Manual 4-44 Samsung Electronics4.1.6.3 General SettingsBefore you get ready to using the machine, it is recommended to set up the machine parameters.1. Press Machine Setup on the control panel.2. Press Admin Setting. When the login message pops up, then enter password and press OK. (Factorysetting is 1111.)3. Press the General tab.Option DescriptionDevice Info The sub-options available are Service Center Registration and Contact Info.You may enter information on service center and purchasing point.Date & Time You can set the date and time.Default Settings • Default Window: Set the first window that will appear on the display screenafter turning on the machine or waking up from the Low Power Mode toSleep Mode. For example, if you select Fax as a default window, the firstwindow will be the Basic tab of the Fax feature. In case you want to show IDCopy as a default window, you need to enable this feature in Default Optionpreviously.• Default Option: Changes all the default values for copying, faxing, emailing,scanning and paper at once.Measurements This option lets you change the measurement unit to use (mm or inch), and setthe numeric separation (comma or period).Timers The machine cancels a printing job if data does not be received in specifictime.• System Timeout: The machine returns to the default value after certain timethe machine waits. You can set a time for maximum 10 minutes.• Held Job Timeout: The machine holds a job for a specific time period. Youcan set a time period for at least an hour.Language It allows you to change the language that appears on the touch screen.Energy Saver You can reduce energy consumption by setting these features. Energy Saverhas three options, first Low Power Mode to Sleep Mode turns off the scannerlamp under the glass. And Power Save turns off all the fans within the machineafter a certain time. Standby to Low Power Mode turns off the fans within themachine except a core fan for the fuser unit.CÓPIA NÃO CONTROLADACÓPIA NÃO CONTROLADA
