English-9Reconnecting the Smart Touch ControlIf you need to re-establish the connection between the TV and the SmartTouch Control, remove the Smart Touch Control’s battery cover, aim the SmartTouch Control at the TV’s remote control receiver, and then press and releasethe pairing button on the back of the Smart Touch Control. The Smart TouchControl will perform the pairing process described on page 8.Battery Low AlarmWhen the Smart Touch Control’s batteries become low, an alarm windowappears at the bottom left of the TV screen. When the alarm window pops up,replace the batteries in the Smart Touch Control with fresh alkaline batteries.e-Manual GuideThe e-Manual embedded in your TV contains information about your TV’s key features. To view the e-manual, use one of thefollowing methods:• Open the Support menu and choose e-Manual (Troubleshooting).• Press the MORE button on the Smart Touch Control to display the virtual remote panel on the screen. Flick left orright on the touch pad until the e-Manual icon appears. Highlight the icon, and then press the touch pad.✎ A printable version of this guide is also available at www.samsung.com/support.[SEK-1000-ZA]BN68-05240A-01L02.indb 9 2013-04-24 �� 1:58:37