Samsung SERIES 6 6900 User Manual

Also see for OfficeServ 7000 Series: System administration guide User guide User instruction User guide User guide

19English03 Basic FeaturesMulti-Track Sound (MTS) t(analog channels only)■ Mono: Choose for channels that arebroadcasting in mono or if you are havingdifficulty receiving a stereo signal.■ Stereo: Choose for channels that arebroadcasting in stereo.MTS■ SAP: Choose to listen to the Separate Audio Program,which is usually a foreign-language translation.✎ Depending on the particular program being broadcast,you can listen to Mono, Stereo or SAP.Auto Volume (Off / Normal / Night)To equalize the volume level on each channel, set to Normal.■ Night: This mode provides an improved soundexperience compared to Normal mode, making almostno noise. It is useful at night.Speaker Select (External Speaker / TVSpeaker)A sound echo may occur due to a difference in decodingspeed between the main speaker and the audio receiver. Inthis case, set the TV to External Speaker.✎ When Speaker Select is set to External Speaker, thevolume and MUTE buttons will not operate and thesound settings will be limited.✎ When Speaker Select is set to External Speakerx TV Speaker: Off , External Speaker: On✎ When Speaker Select is set to TV Speakerx TV Speaker: On , External Speaker: On✎ If there is no video signal, both speakers will be mute.SPDIF OutputSPDIF (Sony Philips Digital Interface) is used to provide digitalsound, reducing interference going to speakers and variousdigital devices such as an A/V Receiver/Home theater.■ Audio Format: During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF) format from the options PCM or Dolby Digital.■ Audio Delay: Correct audio-video sync problems, whenwatching TV or video, and when listening to digital audiooutput using an external device such as an AV receiver(0ms ~ 250ms).Sound Reset (OK / Cancel)Reset all sound settings to the factory defaults.Setup Menu¦ Setting the TimeO MENUm → Setup → Time → ENTERETime■ Clock: Setting the clock is for using various timerfeatures of the TV.O The current time will appear every time you pressthe INFO button.✎ If you disconnect the power cord, you have to setthe clock again.Clock Mode (Auto / Manual)– Auto: Set the current time automatically using thetime from a digital channel.✎ The antenna must be connected in order to setthe time automatically.– Manual: Set the current time manually.✎ Depending on the broadcast station and signal,the auto time set up may not be correct. In thiscase, set the time manually.Clock Set: Set the Month, Day, Year, Hour, Minute andam/pm manually.✎ Available only when Clock Mode is set toManual.✎ You can set the Month, Day, Year, Hour andMinute directly by pressing the number buttonson the remote control.DST (Daylight Saving Time) (Off / On): Switches theDaylight Saving Time function on or off.✎ This function is only available when the ClockMode is set to Auto.Time Zone: Select your time zone.✎ This function is only available when the ClockMode is set to Auto.¦ Using the Sleep TimerO MENUm → Setup → Time → Sleep Timer →ENTERE■ Sleep Timer t: Automatically shuts off the TVafter a preset period of time (30, 60, 90, 120, 150 and180 minutes).✎ To cancel the Sleep Timer, select Off.