Samsung SF-330 Operating Instructions Manual

Also see for SF-330 Series: Quick install guide User manual Repair manual Service guide

C ARE ANDMAINTENANCE7.7C ARE ANDMAINTENANCEC ARE ANDMAINTENANCEC ARE ANDMAINTENANCEC ARE ANDMAINTENANCEC ARE ANDMAINTENANCEC ARE ANDMAINTENANCEC ARE ANDMAINTENANCELCD error messagesDisplay Status/Solution Related to:Adjust scanner firstin Maintenance menuThe shading waveform to be used as a reference is corrupteddue to unknown reason. Adjust the scanner to fix this problemas described in "Shading adjustment" on page 7.4.ScannerCheck white paperdocument and tryagainThe scanning level is too low to compare with reference level.To adjust shading, you should use the plain and white paper.ScannerClean white roller,glass and try againThe scanning level is slightly low, which can affect the imagequality. To clean concerned parts, see "Cleaning the documentscanner" on page 7.2.ScannerDuplicated with[Speed No.xx]The xx indicates the locationnumber.The same number has already been registered into anotherspeed dial location.TelephoneExceeded Job MemoryCancel scheduled joband try againThe broadcasting and delayed fax can hold 5 jobs in total.Cancel scheduled job and try again.FaxExceeded TotalMessage MemoryThe machine can hold up to 100 messages (OGM + ICM +recorded conversations).Erase old messages to make a room in the memory.TAM (SF-335T only)ICM Memory Full The voice memory is full. No more caller’s messages can berecorded (Total recording time is about 15 minutes). TAM (SF-335T only)Ink Low. Install newink cartridgeThe print cartridge has run out of ink. To install a new PrintCartridge, see "Replacing the print cartridge" on page 7.3.Although this message is displayed, you can make a copy orprint a report. But, stored data in memory can be printed bychanging the cartridge.CartridgeInstall ink cartridge Print cartridge is not installed or improperly installed. CartridgeInstall mono inkcartridgeThe mono print cartridge should be installed to copy, print areport or receive a fax.Cartridge (SF-331Ponly)Job Not Assigned You attempted to cancel the scheduled job but there is no jobsscheduled.FaxJunk Fax Empty You attempted to delete the junk fax number when there is nojunk fax number.FaxJunk Fax Full The machine can hold 20 junk fax numbers but you tried to addmore.FaxLoad Document You have tried to send a fax and there is no document loadedinto the machine.DocumentMemory Full Memory has become full while receiving a fax. FaxMemory FullPress Start/Enter tocontinueMemory has become full while scanning a document. PressStart/Enter to send or copy the scanned pages only. To cancelthe job press Stop/Cancel and try again when memorybecomes available, or split the new document into smallerparts.Fax/Copy