Samsung SF-330 Operating Instructions Manual

Also see for SF-330 Series: Quick install guide User manual Repair manual Service guide

7.10Print quality problemsPaper feeding problemsProblem; Solution;Light or blurred characters. Check Ink Level Viewas described in "Ink level view" on page 7.4. If theprinter cartridge has completely run out, Ink Low. Install new inkcartridge is displayed. To install a new print cartridge, see "Replacingthe print cartridge" on page 7.3. Make sure the print cartridge is installedcorrectly. To clean the print cartridge, see "Cleaning the cartridge" onpage 7.5.Smudged or dark characters. Make sure the paper is straight and unwrinkled. Let ink dry beforehandling the paper. To clean the print cartridge, see "Cleaning the car-tridge" on page 7.5.Characters with white lines. If Ink Low. Install new ink cartridge is displayed, install anew print cartridge as described in "Replacing the print cartridge" onpage 7.3. Remove and reinstall the print cartridge. Clean the print cartridge(see "Cleaning the cartridge" on page 7.5.)Improperly formed or misalignedcharacters.Clean the print cartridge (see "Cleaning the cartridge" on page 7.5.)Abnormal black horizontal lines Clean the cartridge carrier (see "Cleaning the cartridge carrier contacts" onpage 7.6.)Problem; Solution;Paper is jammed duringprinting.Clear paper jam as described in "Paper jams during printing" on page 7.11.Paper sticks together. You can load up to 50 sheets in the ASF (Automatic Sheet Feeder).Check if you overloaded. Humid conditions may cause some paper to stick together.Paper fails to feed. Remove any obstructions inside the printer.Multiple sheets of paperfeed.When loading paper, do not force the paper down into the printer. If multiple sheets havecaused a paper jam, clear the paper jam. (see "Paper jams during printing" on page 7.11.)Paper skews or buckles inthe automatic sheetfeeder.ASF can hold up to 50 sheets. Make sure the paper guides do not cause the paper to bow inthe bin. When loading paper, do not force it down into the printer.