Samsung SF-330 User Manual

Also see for SF-330 Series: Quick install guide Operating instructions Repair manual Service guide

Contents

T HE FAXMACHINE3.5T HE FAXMACHINET HE FAXMACHINET HE FAXMACHINET HE FAXMACHINET HE FAXMACHINET HE FAXMACHINET HE FAXMACHINEReceiving in FAX modeTo set the machine to FAX Mode, press Rcv.Mode/Contrast repeatedly until Fax Mode is displayed.• In Standby Mode, FAX appears in the right hand corner of the display.• When you get a call, the machine answers after the second ring, and receives the fax automatically. When reception iscomplete, the machine returns to Standby Mode.• If you want to change the ‘Rings to Answer’ option, see "Rings To Answer" on page 6.7.Receiving in TEL modeTo set the machine to TEL Mode, press Rcv.Mode/Contrast repeatedly until Tel Mode is displayed.In Standby Mode, TEL appears in the right hand corner of the display.1 Pick up the handset and answer it when the telephone rings.If your machine is an SF-335T, and you do not answer the call within pre-defined rings4, the TAM OGMwill be played.2 Press Start/Enter if you hear a fax tone, or if the person on the other end asks you to receive a document. Besure there is no document loaded, or, the document will be sent to the caller’s fax showing ‘TX’ in thedisplay.3 Hang up the handset.Receiving in AUTO modeTo set the machine to AUTO Mode, press Rcv.Mode/Contrast repeatedly until Auto Mode is displayed.• In Standby Mode, AUTO appears in the right hand corner of the display.• When a call comes in, the machine answers it. If a fax is being received, the machine goes into receive mode. If themachine does not sense a fax signal, it will continue ringing to tell you it is a phone call. You should pick up thehandset to answer the call, or it will switch to automatic reception mode, after approximately 25 seconds.Receiving in TAM mode (SF-330/SF-331P)To use this receiving mode, you need to have an answering machine attached. To set the machine to TAM Mode,press Rcv.Mode/Contrast repeatedly until TAM MODE is displayed.In Standby Mode, TAM appears in the right hand corner of the display.• When a call comes in, the answering machine answers and stores the caller’s message if they leave one. If themachine detects a fax signal, it goes into receive mode.• If you have set your machine to TAM Mode and your answering machine is switched off, or the answering machine isnot connected to your fax machine, the machine will automatically go into receive mode after several rings.• If your answering machine has a ‘User-Selectable Ring Counter’, set the machine to answer an incoming call in lessthan 4 rings.• If the sound level of the call is too low due to a poor phone connection, the fax machine or answering machine maynot work properly.• When you set the machine to TEL Mode and you have an answering machine attached, you must make sure youswitch off the answering machine, or, the outgoing message will interrupt your phone conversation. Not allanswering machines will work with your fax machine.• When your answering machine answers an incoming call, it records a fax tone until it realizes it is a fax comingthrough. Due to this, your answering machine may tell you a voice message has been left, even when it is actually afax.4. UK: 20, other countries: 13