F AXING6.34Advanced Fax Setting OptionsOption DescriptionSend Forward You can set the machine to always forward all of theoutgoing faxes to a specified destination, in addition to thefax numbers you entered.Select Off to turn this feature off.Select On to turn this feature on. You can set the numberof the remote fax machine to which faxes are forwarded.RCV Forward You can set your machine to forward incoming faxes toanother fax number during a specified period of time.When a fax arrives at your machine, it is stored in thememory. Then, the machine dials the fax number that youhave specified and sends the fax.Select Off to turn this feature off.Select On to turn this feature on. You can set the faxnumber to which faxes are forwarded. Then, you can enterthe starting time and/or the ending time. The Local Copyoption allows you to set the machine to print the fax, if faxforwarding is completed without any error.Toll Save You can set your machine to store your faxes into thememory and send them at the specified toll-saving time.For details about Toll Save mode, see page 1.39.Select Off to turn this feature off.Select On to turn this feature on. You can set the startingtime and/or the ending time for Toll Save mode.Junk Fax Setup Using the Junk Fax Barrier feature, the system will notaccept faxes sent from remote stations of which theremachine ID’s are stored in the memory as junk faxnumbers. This feature is useful for blocking any unwantedfaxes.Select Off to turn the feature off. Anybody can send you a fax.Select On to turn the feature on. You can set up to 10 faxnumbers as junk fax numbers using the Set option. Thisfeature recognize the last 6 digits of the fax number setas a remote fax machine’s ID.After storing numbers, you do not receive any faxes fromthe registered stations. To delete all the junk fax numbers,use the All Delete option.
