Samsung SF-5800 User's Manual Setup And Operation

Also see for SF-5800P: Service manual User guide

Contents

3.6 TroubleshootingDisplay Meaning SolutionRETRY REDIAL?COMM. ERRORINCOMPATIBLEDOCUMENT JAMDOOR OPEN ORNO TONERGROUP NOTAVAILABLELINE ERRORLOAD DOCUMENTMEMORY FULLNO ANSWERThe machine is waiting for theprogrammed interval toautomatically redial a previouslybusy station.You can press Start toimmediately redial, or Stop tocancel the redial operation.Remote party did not have therequested feature, such as polling.This also occurs if the remote machinehas insufficient memory to completethe operation you are attempting.Reconfirm your remote party’sfeature.The loaded document has jammedin the feeder.Clear the document jam.The cover is not securely latched, orthe image cartridge is not installed.You have tried to select a grouplocation where only a singlelocation number can be used.Press down on the cover until itclicks in place, or install thecartridge.Your unit cannot connect with theremote machine, or has lost contactbecause of a problem on the phone line.Try again. If failure persists, waitan hour or so for the line to clear,then try again.Or, turn the ECM mode on. See‘User Options.’You have attempted to set up asending operation with no documentloaded.Load a document and try again.The memory has become full. Either delete unnecessarydocuments, or retransmit aftermore memory becomes available,or split the transmission intomore than one operation.The remote machine has not answeredafter all the redial attempts.Try again.Make sure the remote machine isoperational.A problem with facsimilecommunications has occurred.Try again.LCD Error Messages