Settings147Set Time & DateUse this menu (Menu 9.3) to configure the settings for the time and datedisplay.To modify Time & Date settings:1. In Idle mode, press the key to access the menu.2. Highlight Settings and press the Select soft key or the key.3. Select Set Time & Date and press the Select soft key or the key.4. Change settings as required (see below).5. To save changes, press the Save soft key.The following settings are available:♦Time Zone Updating: Lets you specify how the time zone information isupdated (Automatic, Prompt first or Manual only).If Manual Only is selected, the following options are enabled:• Home Zone: Lets you specify your location relative to GreenwichMean Time. Scroll left or right to indicate your time zone. You canalso enable or disable Daylight saving, as appropriate.• Time: Lets you enter the current time using the keypad. Scroll left orright to highlight the number you want to modify and then type thenew information. To switch between AM and PM, highlight theindicator and press the right navigation key or any number key.• Date: Lets you enter the current date using the keypad. Scroll left orright to highlight the information you want to modify and then type thenew information.♦Time Format: Lets you specify the time format you prefer (12 hour or 24hour clock). Scroll left or right to select.♦Date Format: Lets you specify the date format you prefer to use. Pressthe key to open the selection screen, highlight a format and press the
