188Section 10Changing the WAP ProfilesYou can set up 10 server profiles for the WAP browser.1. In Idle mode, press the Menu ( ) soft key to accessMenu mode.2. Select Settings. Highlight Connection Settings andpress the Select soft key or the key.3. Select the profile you want.The following options are available:• Profile Name: enter a name that you wish to assign to theHTTP proxy server.• Homepage URL: set the address of your startup homepage.When the default homepage displays, you can delete it usingthe key and enter your own choice.• Bearer: select the bearer to be used for each type of networkaddress accessed: GPRS or DATA. The remaining optionsdepend on the Bearer setting.When the bearer is set to GPRS:• Proxy Setting: enter the WAP gateway address required toconnect to the Internet.• User Name: enter the User ID required to connect to theGPRS network.• Password: enter the password required to connect to theGPRS network.• APN: enter the access point name used for the address ofthe GPRS network gateway.• Proxy Status: allows you to activate and deactivate theproxy status.When the bearer is set to Data:
