Getting connected143If you have difficulty getting the two devices to send orreceive data, try the following:• Make sure that the infrared port windows are clearand free of any dirt or obstructions and that there areno obstacles between the infrared port windows.• Adjust the room lighting or move to another location.Some types of lighting may interfere withtransmission.Note: Your phone’s IrDA function is only compatible withMicrosoft Smart Phones and Windows 2000/XPcomputers.Activating or deactivating IrDA receptionYou must activate the infrared port to let your phone todetect incoming IR transmissions and receive data.1. On the Home screen, press the Start soft key.2. Select Settings → More... → Connections → Beam.3. Select Receive incoming beams.4. Press the Done soft key.Receiving data1. Make sure that your phone’s display is activate and alignthe infrared port on your phone with the one on anotherdevice.Note: The display on your phone must be active.2. Have the other device send the data to your phone.3. When prompted to receive an incoming data, press theYes soft key.
