1464. If secured, you will also need to enter your WAP’spassword.5. Tap Save to store the new information and connect toyour target WAP.Note: The next time your device connects to a previouslyaccessed or secured wireless network, you are notprompted to enter the WAP key again, unless you resetyour device back to its factory default settings.Turning Wi-Fi Off1. From the Home screen, tap ➔ Settings.2. Tap the ON/OFF slider, located to the right of the Wi-Fifield, to turn Wi-Fi OFF .Note: Use of wireless data connections such as Wi-Fi andBluetooth can cause an added drain to your battery andreduce your use times.Manually Scan for a Wi-Fi Network1. From the Home screen, tap ➔ Settings ➔ Wi-Fi.2. Tap Scan.All available Wi-Fi networks are displayed.Wi-Fi Status IndicatorsThe following icons show your Wi-Fi connection status at aglance:Displays when Wi-Fi is connected, active, andcommunicating with a Wireless Access Point(WAP).Displays when Wi-Fi is active but there is acommunication issue with the target WirelessAccess Point (WAP).Displays when connected to another device usingWi-Fi Direct. For more information, refer to “Wi-FiDirect” on page 147.Wi-Fi Advanced SettingsThe Advanced Wi-Fi menu allows you to set up many of yourdevice’s Wi-Fi service, including:• Network notification when an open network is available• Setting your Wi-Fi sleep policy• Checking for Wi-Fi Internet service• Automatically connecting to an AT&T Wi-Fi hotspot when detected• Specifying your Wi-Fi frequency band• Viewing your device’s MAC and IP AddressOFF
