Call Functions 51Switching Between CallsWhen you have an active call and a call on hold, you mayswitch between the two calls, changing the one on hold toactive and placing the other on hold.1. Tap Swap.The current call (caller #2) is placed on hold and theprevious call on hold (caller #1) is then reactivated sothat you can continue conversing with that person. Theactive call will appear in a green box.2. Tap to end the currently active call.To end a specific call1. Tap Swap until the call you want to end appears in agreen box.2. Tap to end the specific call.3. Tap to end the remaining call.To answer a call while you have a call in progress1. Tap and slide to the right to answer another call.2. Tap Putting "Number" on hold to put the first call onhold.– or –Tap Ending call with "Number" to end the first call.3. To switch between the two calls, tap Swap.• Swap: Places the current call on hold and then activates theprevious call. The active call will appear in a green box. TapSwap again to switch back.To end a call on hold1. Tap to disconnect the active call.2. The call on hold will now become the active call. Tapto end the call.3-Way Calling (Multi-Party Calling)The 3-Way or Multi-Party feature allows you to answer aseries of incoming calls and place them on hold. If thisservice is supported by the network, all calls can be joinedtogether. You are notified of an incoming call by a call waitingtone.Note: The Merge option combines all of the calls you haveestablished with your phone (both active and on hold).Swap places the current call on hold and then activatesthe previous call.This feature joins all of the calls you have established withyour phone (both active and on hold) into a multi-party call.
