128Manually Scan for a Wi-Fi Network1. From the Home screen, tap ➔ Settings ➔ Wi-Fi.2. Tap Scan.All available Wi-Fi networks are displayed.Wi-Fi Status IndicatorsThe following icons show your Wi-Fi connection status at a glance:Displays when Wi-Fi is connected, active, andcommunicating with a Wireless Access Point (WAP).Displays when Wi-Fi is active but there is acommunication issue with the target Wireless AccessPoint (WAP).Displays when connected to another device usingWi-Fi Direct. For more information, refer to “Wi-FiDirect” on page 128.Wi-Fi Advanced SettingsThe Wi-Fi settings - Advanced menu allows you to setup many of your device’s Wi-Fi service, including:• Setting your Wi-Fi sleep policy• Viewing your device’s MAC Address• Configuring use of either a DHCP or Static IPTo access the Bluetooth Settings menu:1. From the Home screen, tap ➔ Settings ➔ Wi-Fi.2. Tap Advanced.For more information, refer to “Advanced Wi-Fi Settings” onpage 91.Wi-Fi DirectWi-Fi Direct allows device-to-device connections so you cantransfer large amounts of data over a Wi-Fi connection.1. From the Home screen, tap ➔ Settings ➔ Moresettings.2. Tap the ON/OFF slider, located to the right of the Wi-FiDirect field, to turn Wi-Fi Direct ON .3. From the Settings screen, tap Wi-Fi Direct.4. Repeat steps 1 - 3 on the other device you want to connectwith. The steps on a different model of phone, may bedifferent.5. On your phone, tap Scan.The device scans for other Wi-Fi Direct devices.
