Phonebook386. Once you have found the entry, press thekey to dial the number, or press the Optionssoft key to access the Phonebook entry options;for further details, see page 32.Editing a caller group1. When the idle screen displays, press the Menusoft key.2. Scroll to Group edit by pressing the Up or Downkey and press the Select soft key.3. Scroll through the group list by pressing the Upor Down key.4. When the group you want highlights, press theOptions soft key.5. Select each option and change the settings, asyou want. The following options are available:• Call ringtone: allows you to set a ring tone tobe used when you receive a voice call from amember of that group.• SMS tone: allows you to set a ring tone to beused when you receive a message from amember of that group.5. To Press theview the highlightedentryView soft key.select a differententryUp or Down key untilthe entry you wanthighlights.Phonebook39• Graphic: allows you to set a graphic icon to bedisplayed when you receive a voice call from amember of that group.• Group name: allows you to assign a name tothe group. For further details about how toenter characters, see page 42.6. When you have finished, press the C or key.Deleting all of the Phonebook entriesYou can delete all of the entries in the selectedmemory or both memories.1. When the idle screen displays, press the Namesoft key.2. Scroll to Delete all by pressing the Up or Downkey and press the Select soft key.3. To place a check mark by the memory you wantto empty, All, SIM, or Phone, press the Marksoft key.You can remove the check mark by pressing theUnmark soft key.4. When you have finished marking, press theDelete soft key to delete the entries in theselected memory location(s).5. Enter the phone password and press the OK softkey.Note: The password is preset to “00000000” atthe factory. To change this password, seepage 128.