128Access codesThere are several access codes that are used byyour phone and its SIM card. These codes help youprotect the phone against unauthorised use.When requested for any of the codes explainedbelow, enter the appropriate code (displayed asasterisks) and press the OK soft key. If you make amistake, press the C key one or more times untilthe incorrect digit is cleared and then continueentering the correct code.The access codes, except for the PUK and PUK2codes, can be changed using the Security menu(Menu 5.5). See page 88 for further details.Important! Avoid using access codes resemblingemergency numbers, such as 112, sothat you do not accidentally dial anemergency number.Phone passwordThe Phone lock feature uses the phone password toprotect your phone against unauthorised use. Thephone password is supplied with the phone and ispreset to “00000000” at the factory.To Seeactivate/deactivate thePhone lock featurepage 89 (Menu5.5.3).change the phonepasswordpage 90 (Menu5.5.4).Access codes129PINThe Personal Identification Number or PIN (4 to8 digits) protects your SIM card againstunauthorised use. It is usually supplied with theSIM card.If you enter an incorrect PIN three times insuccession, the code is disabled and cannot be useduntil you re-enable it by entering the PUK (seebelow).PUKThe 8-digit PUK (PIN Unblocking Key) is required tochange a disabled PIN. The PUK may be suppliedwith the SIM card. If not, or you have lost it,contact your service provider.To re-enable your PIN:1. Enter the PUK and press the OK soft key.2. Enter a new PIN of your choice and press the OKsoft key.3. When the Confirm new PIN message displays,enter the same code again and press the OKsoft key.If you enter an incorrect PUK ten times insuccession, the SIM card becomes invalid. Contactyour service provider for a new card.To Seeactivate/deactivate thePIN check featurepage 89 (Menu5.5.1).change the PIN page 89 (Menu5.5.2).