Samsung SGH-P910 User Manual

Contents

49Menu functions Messages (Menu 5)SMTP port: enter the SMTP port number.Use SSL: activate the use of the SSL (SecureSockets Layer) protocol.Retrieving server type: select the protocol forthe incoming e-mail server. The remainingoptions depend on the protocol type setting.POP3 server/IMAP4 server: enter the IPaddress or host name of the POP3 or IMAP4server.POP3 port/IMAP4 port: enter the POP3 orIMAP4 port number.Use SSL: activate the use of the SSL (SecureSockets Layer) protocol.IMAP4 retrieving option: (IMAP4 protocolonly): set whether the phone retrieves only newmessages or all messages.Retrieving option: set which part of e-mailsthe phone retrieves from the server.Keep in server: leave the copies of e-mails inthe server after retrieving.My Address: set your e-mail address.User name: enter the POP3 or IMAP4 username.Password: enter the POP3 or IMAP4 password.Use SMTP Authentication: enable SMTPauthentication, which requires the user to log inbefore sending e-mails.Same as POP3/IMAP4: select if you want theSMTP server to have the same parameters as thePOP3 or IMAP4 server.User name: enter the SMTP user name.Password: enter the SMTP password.Voice mail (Menu 5.0.4)You can change the number of the voicemail server.Video mail (Menu 5.0.5)You can change the number of the videomail server.Push message (Menu 5.0.6)You can change the settings for receiving pushmessages from the wireless web server.• Receiving option: set whether or not to receivepush messages from the web server.• Direct launch: set whether or not your phoneautomatically launches the web browser toaccess a push message as it comes in.• Scrolling ticker: set whether to display pushmessage alerts in Idle mode.You must store the voicemail server numberbefore accessing the server. Your service providercan give you the number.You must store the videomail server numberbefore accessing the server. Your service providercan give you the number.