Samsung SGH-R210 Owner's Manual

73TToonneessDeleting a Melody1. Select the melody that you wish to delete.2. Press and hold for a few seconds.All notes are erased.3. Press the Listen soft key. You are asked toconfirm that you wish to delete the melody bypressing the Yes soft key.Ring Volume Menu 3-3This option allows you to adjust the ringing volumeto one of five levels.Use the or keys. The greater thenumber of bars, the greater the volume level.Alert Type Menu 3-4This option allows you to indicate how you are to beinformed of any incoming calls. The following optionsare available.Light only: only the backlight is switched on; thephone neither rings nor vibrates.Melody: the phone rings using the ringing toneselected via menu option 3-1.Vibration: the phone vibrates but does not ring.Vibra+Melody: the phone both rings and vibrates.72TToonneessTo... Then press the...Enter a rest key (press the keyuntil the rest is of therequired length).Delete notes key.Move a note a or key (forsemitone up or down example, the note Achanges to A#, B, C, C#,and so on in the scaleeach time you pressthe key).Change the length key (the lengthof a note will be changed eachtime you press the key).Listen to your melody Listen soft key.Cancel your changes key.3. When you are satisfied with your melody, pressthe Yes soft key.4. Enter a title for the melody.Note: For further details on how to entercharacters, refer to page 35.You are asked if the melody is to become theringing tone.5. To use the melody as the ringing tone, press theYes soft key.The melody is saved and is played each time yourphone rings. You can also select the melodiescomposed via the Ring Tone menu option (3-1).