83SSeettttiinnggss82SSeettttiinnggssExample: You can:• Systematically divert fax calls to youroffice fax machine• Divert voice calls to your colleague ifyou are already using the phoneTo set your call diverting options, proceed as follows.1. Select the type of call diverting required bypressing or until the appropriateoption is highlighted, and then press the Selectsoft key.2. Select the type of calls to be diverted bypressing or until the appropriateoption is highlighted and then press the Selectsoft key.3. Press the Activate soft key to confirm your settings.4. Enter the number to which the calls are to bediverted.To enter the international code, press 0 until the+ sign is displayed. You can also select a numberin the phonebook or the voice server number, bypressing the Options soft key, followed byPhoneBook or Voice Server Number.5. When you are satisfied, press or the OK softkey.The phone sends your settings to the network andthe network’s acknowledgement is displayed.To deactivate specific call diverting settings, proceedas follows.1. Select the call diverting option to be deactivated.2. Select the type of call to which this option applies.Call DivertingNote: Some call divert options may not be shown ifthey are not supported by your networkoperator.This network service enables incoming calls to bererouted to the number that you specify.Example: You may wish to divert your business callsto a colleague while you are on holiday.Call diverting can be set up in the following ways.Divert Always: all calls are diverted.Busy: calls are diverted if you are already on thephone.No Reply: calls are diverted if you do not answer thephone.Unreachable: calls are diverted if you are not in anarea covered by your service provider.Unavailable: calls are diverted if you are busy, do notanswer or cannot be reached.Cancel All: all call diverting options are cancelled.Note: These options may be different, depending onthe SIM card.You can specify individual diverting options for each ofthe following call types:• Voice calls only• Fax calls only (not available when line 2 is in use)• Data calls only (not available when line 2 is in use)