Phone Settings86must enter the current password before you canspecify a new one.The password is preset to “00000000” at thefactory. Once you have entered a new password,you are asked to confirm it by entering it again.SIM Lock (Menu 4.4.5)To enable the SIM Lock feature, you must enter anew four- to eight-digit SIM lock code, and confirmit by entering it again.The following options are available:Disable: you can use any other SIM cards withyour phone.Enable: you must enter the SIM lock code to useanother SIM card with your phone.To unlock the SIM, enter the SIM lock code.FDN Mode (Menu 4.4.6)The FDN (Fixed Dial Number) mode, if supported byyour SIM card, allows you to restrict your outgoingcalls to a limited set of phone numbers.The following options are available:Enable: you can only call phone numbers stored inPhonebook. You must enter your PIN2.Disable: you can phone any number.Note: Not all SIM cards have a PIN2. If your SIM carddoes not, this menu option is not displayed.To change your PIN2, see the Change PIN2 menuoption. See below.Phone Settings87Change PIN2 (Menu 4.4.7)The Change PIN2 feature allows you to change yourcurrent PIN2 to a new one. You must enter thecurrent PIN2 before you can specify a new one.Once you have entered a new PIN2, you are askedto confirm it by entering it again.Note: Not all SIM cards have a PIN2. If your SIM carddoes not, this menu option is not displayed.Auto Redial (Menu 4.5)With the Auto Redial function, the phone makes upto ten attempts to redial a phone number after anunsuccessful call.Note: The interval between two call attempts varies.The following options are available:Off: the number is not redialled.On: the number is redialled automatically.Side Key (Menu 4.6)This menu option allows you to change the functionof the volume keys on the left side of the phonewhen you receive an incoming call.The following options are available:Reject: the incoming call is rejected when you holddown one of the volume keys.