Camera 97Configuring the Camcorder Before taking a photo, press Menu (LSK) to access thecamcorder options.• Camcorder: allows you to record a video.• Mode: limit the size of videos. Choose Normal or Limit for MMS.• Size: if Limit setting is Normal, displays either 320x240 or 176 x144.• White balance: choose a setting to match conditions. Choose fromAuto, Daylight, Incandescent, Fluorescent, or Cloudy.• Exposure meter: choose how the camera measures the lightsource: Matrix, Center-weighted or Spot.• Effects: apply special effects to the photo. Options include: None,Black and White, Sepia, Negative, or Watercolor.• Default destination: Remove a current destination location orChange the current location.• Timer: set a time delay between the time you press andthe video starts to record. Select the length of delay, from Off, 2seconds, 5 seconds, or 10 seconds.• Viewfinder mode: select Full screen view and guidelines. orStandard ratio view.• Settings:– Video: set the Quality of the video, to Economy, Fine, or Superfine, andset Audio recording to On or Off.– Setup: configure the Review screen, Default storage, or viewcamcorder Shortcuts.Camcorder ShortcutsShortcut keys allow you to change some settings using thekeypad, Navigation keys, and Volume key while in capture mode.Note: These button functions also apply to the camcorder feature if it isaccessed via Menu (LSK) ➔ Media ➔ Videos ➔ Record video.shoots video.NavigationKeysLeft and Right navigation keys adjust the imagebrightness.Up and Down navigation keys zoom in and out.Allows you to switch between Cameraand Camcorder modeschanges the size of the image being recorded.cycles among the various timer modes (Off, 2seconds, 5 seconds, or 10 seconds).changes the viewfinder mode.t259_Sienna.book Page 97 Wednesday, January 19, 2011 11:30 AM