863. When you hear “Which status item?”, speak an item.Voice Recognition SettingsVoice recognition settings consist of the following options:• Confirmation• Adaptation• Audio modes• Speakerphone• AboutConfiguring Voice Recognition OptionsTo change the confirmation:1. From Home screen, press Menu (LSK) ➔ Organizer ➔Voice recognition.2. From the “Say a command” prompt, press Settings (RSK)➔ Confirmation.3. Select one of the available options:• Automatic to always provide you with options if there was an issueregistering the command, confirm any commands, and thenannounce any actions.• Always Confirm to always confirm any command actions beforethey are done, even if it was properly registered.• Never Confirm to never confirm any command operations. Thephone will always act on what it registers as the current command,even if it is incorrect and without notifying you.To adapt the system to your voice:1. From Home screen, press Menu (LSK) ➔ Organizer ➔Voice recognition ➔ Settings (RSK) ➔ Adaptation ➔Adapt voice ➔ Start.2. Hold the phone so that the microphone is approximatelysix inches away from your mouth and you can clearly readthe onscreen number sequences.3. Repeat either the digits or words shown onscreen using anormal tone of voice.• If the phone cannot recognize your words, it will continue to displaythe same information onscreen.4. Repeat the previous step for the remaining sets of digits orwords.5. When you are finished with a full session, you will reach ascreen that reads, “Adapting.”6. Press to save.t259_Sienna.book Page 86 Wednesday, January 19, 2011 11:30 AM
