Call Functions 47Having a Private Conversation withOne ParticipantWhen you have two participants in a multi-party session, youmight be necessary to place one of those participants onhold so that a private conversation can be held with a singlecaller. While you are in a multi-party call:1. Touch Split. The short list of call participants displaysthe callers in the order they were dialed.2. Select the number for the participant in which youwant to speak privately.You can now talk privately to that person while theother participants can continue to converse with eachother. If there is only one other participant, that personis placed on hold.3. To return to the multi-party call, touch the Join icon.All of the multi-party call participants can now heareach other.Dropping One ParticipantIf the call is joined:1. Press Split and highlight the number to split.2. Press to drop the call on hold.Putting a Call on HoldYou can place the current call on hold whenever you want.You can also make another call while you have a call inprogress if your network supports this service.To place a call on hold: Touch Hold.To make a new call while you have a call in progress: Touch Dial, then enter the second phone number andpress .The first call is automatically placed on hold.When you have both an active call and a call on hold, you canswitch between the two calls.To switch between the two calls:1. Touch either the In call tab, or the On hold tab, andtouch Swap. The active call is placed on hold and thecall on hold is then reactivated so that you cancontinue conversing with that person.2. To finish, end each call normally by pressing .