109Ringer SettingsThis menu allows you to specify how you are informed of incoming calls.NormalThe phone’s profile defaults to Normal which means that the incoming Alert Type is set to melody.Call1. From Idle mode, touch Menu ➔ Settings ➔ Ringer settings.2. Touch the Normal profile.3. Touch the Pull down menu and select Call.4. Touch the Call alert type field, select one of the following and touch Save:• Melody: the phone rings using the ring melody selected in the Ring tone menu.• Increasing melody: the melody volume increases.• Vibration then melody: the phone vibrates 2 times and then starts ringing.• Vibration & melody: the phone vibrates and plays a melody simultaneously.• Vib. & increasing melody: the phone vibrates and the melody increases simultaneously.5. Touch the Ringtone field, touch to select a ringtone and touch Save.6. Touch the Call alert volume slide bar, then touch and drag the slider to the volume level you desire (rangeis 1-7).7. Touch the Call alert vibration field, then touch to select Vibration 1 - 5 and touch Save.8. Touch Save to return to the Ringer settings menu.Message1. From Idle mode, touch Menu ➔ Settings ➔ Ringer settings.2. Touch the Normal profile.3. Touch the Pull down menu and select Message.4. Touch the Message alert type field, select one of the following and touch Save.• Melody: the phone rings using the ring melody selected in the Message alert type menu.T746 UG.book Page 109 Wednesday, September 2, 2009 3:24 PM
