Changing Your Settings 268Adjusting Screen BrightnessThis feature configures the LCD Brightness levels.1. Press ➔ and then tap Settings ➔ Display➔ Brightness.2. Tap Automatic brightness to allow the phone to self-adjust and tap OK.– or –Touch and slide the on-screen slider to adjust the leveland tap OK.Gyro Sensor CalibrationCalibrate your phone by using the built-in gyroscope.1. Press ➔ and then tap Settings ➔ Display➔ Gyroscope calibration.2. Place the phone on a level surface and tap Calibrate.The phone adjusts the level of the accelerometer.During the calibration process a green circle appearson-screen and the center circle adjusts to the centerposition.Power Saving ModeThis feature allows you both automatically set the phone touse a power saving mode and configure additional powersaving options manually, all in an effort to conserve batterypower.1. Press ➔ and then tap Settings ➔ Powersaving.2. Select System power saving to use the device’s defaultpower saving parameters.– or –Select Custom power saving to create your own custompower saving plan. Once enabled, you can adjust thesettings.3. When the power gets low, confirm appears at thetop of the screen. This indicates the power savingmode is active.To automatically enable power saving from Notifications:1. In a single motion, touch and drag the Status bar down tothe bottom of the screen to reveal the Notifications panel .2. Tap Power Saving. For more information, refer to“Notification Panel” on page 40.
