264Near Field CommunicationThis feature is used to read and exchange tags. When usedin conjunction with Android Beam, your device can be usedto beam application content when NFC-capable devices aretouched. For more information, refer to “TecTiles” on page223.1. Press ➔ and then tap Settings ➔More settings.2. Tap the NFC field. A check mark displayed next to thefeature indicating it is enabled.Note: Enabling NFC also enables Android Beam and S Beam.Android BeamThis feature (when activated via NFC) allows you to directlybeam application content to another NFC-capable devicewhen they are in direct contact. These files are typicallysmall such as Calendar and Contact entries.1. Press ➔ and then tap Settings ➔More settings.2. Verify the NFC feature is active.3. Tap Android Beam and make sure the feature is turnedon.4. If not already active, in a single motion touch and slidethe Android Beam slider to the right to turn it on.5. Complete the transfer process between the twoNFC-enabled devices by placing them back to back.S BeamThis feature (when activated via NFC) allows you to beamlarge files directly to another compatible device that is indirect contact. These files can be larger, such as Videos, HDpictures, and other large files.You can beam images andvideos from your gallery, music files from your music player,and more.1. Press ➔ and then tap Settings ➔More settings.2. Verify the NFC feature is active.3. Tap S Beam and make sure the feature is turned on.4. If not already active, in a single motion touch and slidethe S Beam slider to the right to turn it on .ONON
