Samsung SGH-X450 Quick Manual

Also see for SGH-X450: Quick reference card Service manual

Contents

Getting Started202. Plug the adapter into a standard AC wall outlet.While charging, the battery icon at the top rightcorner of the display repeatedly fills to show thatthe battery is charging.3. When charging is finished, the battery iconbecomes solid and “Fully charged” message isdisplayed, unplug the adapter from the poweroutlet and from the phone by pressing the graytabs on both sides of the connector and pullingthe connector out.Note: You must unplug the adapter before removingthe battery from the phone during charging;otherwise, the phone could be damaged.Low Battery IndicatorWhen the battery is weak and only a few minutes oftalk time remain, the battery sensor informs you inthe following ways: an empty battery icon flashes( ), you hear a warning tone and a messagerepeats at regular intervals on the display.When the battery becomes too weak for the phoneto operate, it switches off automatically.Getting Started21Switching the Phone On or OffTo switch the phone on:1. Open the folder.2. Hold down the key until the phoneswitches on.3. If the phone asks you to enter the phonepassword, enter the password and press the OKsoft key. The phone password is preset to“00000000” at the factory. For further details,see page 139.The phone searches for your network and thecurrent date and time appear on the display.Once attached to a network, you can make orreceive a call.Note: To change the language, use theLanguage menu option (Menu 5.4).For further details, see page 99.To switch the phone off:Hold down the key until the power-offanimation displays.Service Provider07:30Wed 06 MarMenu Name