80Connection SettingsYou can customize the profiles containing the settings for connecting your phone tothe network. These settings are used for the WAP browser or Instant Messenger, orsending MMS messages.Note: Your phone connects to the network by default. If you change the MMS settings without first checkingwith your service provider, the WAP, MMS features may not work properly.1. In Idle mode, press the Menu soft key to access Menu mode.2. Select Settings and highlight Connection Settings. Press the Select softkey or the key.3. Select the profile you want to change.For each profile, the following options are available:• Profile Name: enter a name that you wish to assign to the profile.• Home URL: enter the address of the WAP homepage of your serviceprovider.• Proxy: place a check in the box to use the proxy server.• IP Address: enter the IP address of the proxy server.• Port: enter a port number or use default setting.• DNS• DNS1: enter the primary DNS (Domain Name System) address.• DNS2: enter the secondary DNS address.• Bearer: select the network bearer type for data transmission, either GPRS orGSM.• Advance Settings• APN: enter the access point name used for the address of the network.• Login ID: enter the user ID required to connect to the network.• Password: enter the password required to connect to the network.Software UpdateSoftware Update allows your wireless provider to automatically install high-priorityupdates on your handset.Voice Command SettingsChoice ListsIf VoiceSignal is not absolutely confident that it has correctly identified a name ornumber, it can display a choice list of up to three possibilities, and prompt you toconfirm the correct one.
