Entering Text444. Insert a space by pressing the key and start entering the nextword.To add a new word into the T9 dictionary:1. After pressing the keys corresponding to the word you want toadd, press the 0 or Down key to display the alternative words.2. When you press the 0 or Down key on the last alternative word,the display shows Add on the bottom line. Press the Add soft key.3. If necessary, clear the word using the C key and enter the wordyou want using Alphabet mode. See page 44.4. Press the OK soft key.The word is added to the T9 dictionary and becomes the first wordfor the associated keypress.♦To enter periods, hyphens or apostrophes, press the 1 key. T9mode applies grammar rules to ensure that the correct punctuationis used.♦To shift the case in T9 mode, use the key. There are three cases;Initial Capital ( ), Capital lock ( ) and Lower case ( ).♦You can move the cursor by using the Left and Right keys. Todelete letters, press the C key. Press and hold the C key to clear thedisplay.Using Alphabet ModeUse the 1 to 0 keys to enter your text.1. Press the keys labeled with the letter you want:• Once for the first letter• Twice for the second letter• And so on2. Select the other letters in the same way.
