Wireless network setup1422. Using a network-connected machine4 If it’s your first time logging into SyncThru™ Web Service you need tolog-in as an administrator. Type in the below default ID and password.We recommend you to change the default password for securityreasons.• ID: admin• Password: sec000005 When the SyncThru™ Web Service window opens, click NetworkSettings.6 Click Wireless > Custom.You can also turn the Wi-Fi network on/off.19Setting the Wi-Fi Direct for mobile printingWi-Fi Direct is an easy-to-setup peer-to-peer connection method between theWi-Fi Direct certified printer and a mobile device that provides a secureconnection and better throughput than ad hoc mode.With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network whileconcurrently connecting to an access point, You can also use a wired networkand a Wi-Fi Direct network simultaneously so multiple users can access and printdocuments both from Wi-Fi Direct and from a wired network.• You cannot connect your mobile device to the internet through theprinter’s Wi-Fi Direct.• The supported protocol list may differ from your model, Wi-Fi Directnetworks do NOT support IPv6, network filtering, IPSec, WINS, and SLPservices.• The maximum number of devices that can be connected via Wi-Fi Directis 3.Setting up Wi-Fi DirectYou can enable Wi-Fi Direct feature by one of the following methods.
