Media and tray332. Basic setup- Arrangement: Only use labels with no exposed backing between them.Labels can peel off sheets that have spaces between the labels, causingserious jams.- Curl: Must lie flat with no more than 13 mm of curl in any direction.- Condition: Do not use labels with wrinkles, bubbles, or otherindications of separation.• Make sure that there is no exposed adhesive material between labels.Exposed areas can cause labels to peel off during printing, which can causepaper jams. Exposed adhesive can also cause damage to machinecomponents.• Do not run a sheet of labels through the machine more than once. Theadhesive backing is designed for only a single pass through the machine.• Do not use labels that are separating from the backing sheet or are wrinkled,bubbled, or otherwise damaged.Card stock/ Custom-sized paper• In the software application, set margins at least 6.4 mm (0.25 inches) awayfrom the edges of the material.
