5-71CDRtcpport portCDRtcpport portCDRtcpport portCDRtcpport portFunction Set the TCP port for the TCP Link that will display the CDR output information.It is already set as the Default(8200 port) value, and the user can use the CLIcommand to change the setting.Default [CDR] TCP Port 8200Procedure At the SMG-3200 prompt, type 'CDRtcpport' and a space, and type the TCP portfor displaying the CDR information, and then press [Enter].For example, if you want to set the TCP port for displaying the CDR informationas 8500, type 'CDRtcpport 8500' on the screen, and press [Enter], and then theport will be set as follows:SMG3200:165.213.81.230> CDRtcpport 8500>>>[CDR] Set CDR Output on TCP Port(8500)Goodvalue = 0 = 0x0SMG3200:165.213.81.230>
