| 
4-16 Chapter 4Configuring the System3. Input the number of desired PCM type and press [Enter].Configuration Item Number: 0PCM Type (0:U_LAW, 1:A_LAW): A_LAW -> 14. To close current screen, type ‘.’ and press [Enter].Configuration Item Number: .5. After returning to the screen, type ‘16’ and press [Enter].<<<<< PSTN Configuration Menu >>>>>[0] Gateway Operation Mode[1] PSTN Rerouting Insert Digit[2] PCM Method[3] Dial Method[4] SLC Signal[5] Trunk Signal[6] Call Control Method[7] Ring Cadence[8] System Tone Cadence[9] CO Tone Cadence[10] Gain Control[11] Diagnosis[12] MMC Port Block/UnBlock[13] Display Slot Configuration[14] Display Port Status[15] Save & Exit[16] ExitSelect ? 166. Message asking if you want to save the changed configuration in flash memory is displayed.Type ‘y’ and press [Enter].# PSTN Configuration has changed. Save? (y: Yes, n: No) -> y7. Changed data is saved in flash memory, and you are returned to the initial screen of theSMG-3200 CLI interface. |
