Samsung SNB-3002 User Manual

Also see for SNB-3002: User manual

setup screennetworK Setupinterface1. From the Setup menu, select the<network ( )> tab.2. Click <interface>.3. Set the <interface>.• IP type : Select an IP connection type.- Manual : Specify the IP address,Subnet mask, Gateway, DNS1,and DNS2.- DHCP : Specify the DNS1 andDNS2.- PPPoE : Specify the DNS1, DNS2,ID and Password.` If you set it to <Manual>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.• MAC address : Shows the MAC address.• IP address : Displays the current IP address.• Subnet mask : Displays the <Subnet mask> for the set IP.• Gateway : Displays the <Gateway> for the set IP.• DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.4. Set the <ipv6 setup>.` Set to <Use> to use IPv6 address.• Default : Use the default IPv6 address.• DHCP : Display and use the IPv6 address obtained from the DHCP server.• Manual : Enter IP address and gateway manually and use it.5. When done, click [apply ( )].J ` The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previoussettings will be restored automatically.` Once completed with editing, click [Apply ( )] to apply changes and the browser exits.After a while, connect again with the changed IP.60_ setup screen