Samsung SNB-3002 User Manual

Also see for SNB-3002: User manual

to use motion detectionIt detects a motion that meets all conditions specified by size and area.1. Select <Size> tab.You can limit the minimum/maximumsize of motion to be detected.• Minimum size : To set the minimumsize of detected motions, selectdesired minimum size on the screen.• Maximum size : To set the maximumsize of detected motions, selectdesired maximum size on the screen.J ` Motions smaller than the specifiedminimum size or bigger than themaximum size are not detected. To avoidunintended detections caused by greatand small noises, set minimum/maximummotion sizes appropriately in accordanceto your environments.Note that same motions on the samelocation can be differently detected intheir detection size; it is recommendedto consider and include the tolerabledifference when setting the minimum/maximum detection sizes.2. Select <area> tab.You can specify an area on the screen to exclude the area from detection.You can specify up to 4 areas.• Non detection area : Sets the entire screen as motion detection area, andexcludes specified area as not to be detected. Use your mouse to drag to specifypreferred area as the non detection area.3. To delete an area, right click on the screen to open popup context menu and selectDelete, and [oK] button.J ` All areas defined are deleted.4. When done, click [apply ( )].English _77● Setup Screen