Samsung SNB-7000 User Manual

Also see for SNB-7000: User manual Technical specifications User manual

English _53● SETUP SCREEN• Sens-up limit : Set the work condition to Auto mode in a low contrast scene.• Lens : You can set the camera lens to AUTO or MANUAL to your preference.- DC(Auto) : Select this if you use the DC lens. Only the iris is adjustedautomatically, but the focus is not controlled automatically.- Manual : Select this if you use a lens on which you adjust the iris and focusmanually.• AGC mode : Specify the level according to the screen luminance.• Indoor/Outdoor : Select Indoor or Outdoor for the installation environment.Special Setup1. Select <Special>.2. Select each item and set it properly.• Day & night : You can switch themode to adjust the black and whitelevel as well as the colors.- Color : Always displays the video incolors.- B/W : Always displays the video inblack and white.- Auto : Displays in color mode during normal daytime and switches to black andwhite mode in a low contrast scene at night. If you set the AGC mode to OFF from <Exposure>, the AUTO DAY/NIGHT mode will be disabledaccordingly.- Externel B/W : Control the image modes of Color and B/W when an external IRis synchronized via the Alarm In port.• Dwell time : This is the time while each applicable lighting condition is kept inorder to enable the switch between day and night modes.• Duration : Adjust the brightness of the lighting where the mode switch occurs.• Sharpness mode : Adjust the overall sharpness of the image.If selecting <On>, you can adjust the sharpness of the image.• Sharpness level : The higher the level is, the sharper and clearer the outline of theimage becomes.• Gamma : Adjust the contrast of the image.• Color level : Adjust the color level of the image.• Alarm in : Set the image to Color or B/W depending on the state of the alarmsensor in sync with the IR. If the Day & Night mode is set to Externel B/W, the alarm-in function of the event-alarm input pagewill be disabled.