Samsung SNB-7000 User Manual

Also see for SNB-7000: User manual Technical specifications User manual

English _65● SETUP SCREEN- Sender : Enter the address of the email sender. If the sender address isincorrect, the email from the sender may be classified as SPAM by the emailserver and thus may not be sent.- Subject : Enter a subject for your email.- Body : Provide the text for the massage. Attach the alarm images to the emailthat you are preparing.4. When done, click [Apply ( )].SD recordYou can set the record conditions or the use of recording for the SD memory, check thesize of stored data, or format the SD memory itself.1. From the Setup menu, select the<Event ( )> tab.2. Click <SD record>.To make recording on the SD memory1. Check the <Total size> and the <Free size>.2. If the SD memory has a sufficient free space, set <Record> to <On>.Otherwise, check the stored data and if you find them not important, then click<Format> to format the SD memory. If your SD memory card writes slowly, only one frame per second will be stored. For a SD memory card with a large capacity, the formatting will be slowed down accordingly. If the size of data grows with time, only 1 fps can be stored even if you set the record quality to FullFrame.3. Specify the record conditions.• Record profile : Display the number of profile to record.• Record 1 fps forcibly : Only one frame per second will be recorded regardless ofthe existing record profile.- For H.264, it will be enabled only if the bit rate is less than 4800 kbps.- For MJPEG, it will be enabled only if the resolution is less than 800x600.• Overwrite : If the SD memory is full, this will delete old data and store new data inreplacement.