Samsung SP-R4232 Owner's Instructions Manual

Also see for R4232 - SP - 42" Plasma TV: Manual de instrucciones

Contents

171 Remove the 4 screws on the back of the product.2 Insert the screw into the plastic hanger. (See the figure below)Fixing the TV panel to the wall attachment panel bracketThe shape of the product may vary depending on the model. (The assemblies of the plastichanger and the screw are the same)3 Tighten the 4 screws in step 2 (plastichanger + screw ) to the rear holes ofthe product. 4 Remove safety pin (#) and insert the 4product holders into the correspondingbracket holes (!). Then place theproduct (@) so that it is firmly fixed tothe bracket. Make sure to reinsert andtighten the safety pin (#) to securelyhold the product to the bracket.PDPWall Bracket Wall• Mount the product on the wall bracket and make sure it is properly fixed to the left andright plastic hangers.• Be careful when installing the product on the bracket as fingers can be caught in the holes.• Make sure the wall bracket is securely fixed to the wall, or the product may not stay inplace after installation.