13CCaallll FFuunnccttiioonnssUsing Call LogPress TALK to access call log in Standby mode.To recall any number of these log, proceed as follows.1. Use the navigation key to scroll through the list untilyou select the required name or number.2. Press TALK to dial the number displayed.Speed DialingOnce you have stored phone numbers in the phone bookmemory, you can dial them easily whenever you want.You can dial the stored phone number automaticallywithout pressing TALK. See below.One-Touch DialMemory locations 01 through 09 are special one-touchlocations. You can dial the phone numbers stored in thePhone Book memory from 01 through 09 simply bypressing one button.Press and hold the third digit of the memory locationcontaining the number to be dialed.For example: Location no. 009Press and hold 9.The number (and name) stored is displayed, then dialed.12Call FunctionsMaking a CallIn Standby mode, key in the area code and phone numberand press TALK .Correcting the NumberTo clear ... Then ....The last digit displayed Press BACK .The whole display Hold down BACK formore than one second.Ending a CallWhen you have finished your call, briefly press END orclose the phone.If you press END, the call time (length of the call)displays briefly and the phone returns to Standby mode.