60 2B. Making and Answering CallsIn-Call OptionsOnce you initiate a call, youwill see six onscreen options.Tap an option to select it. Add call touch and hold toinitiate a 3-way call(page 163). Merge to join two currentlyactive calls (conference). Dialpad/Hide to toggle theappearance of the onscreendialpad. End call to end the currentcall. Speaker to route the device’s audio through thespeaker (On) or through the earpiece (Off). Activate Speaker to route the device’s audiothrough the speaker. (You can adjust the speakervolume using the volume buttons.) Deactivate Speaker to use the device’s earpiece. Mute to mute the microphone during an active call.Tap again to unmute the microphone. Bluetooth to route the device’s audio through aconnected Bluetooth headset (On) or through thespeaker (Off). (See “2J. Bluetooth” on page 142.) When the call is routed to a Bluetooth headset,the current call area shows the Bluetooth callicon ( ).● To route the current call back to the device,tap Headset to temporarily use the device. Tapit again to route the call back to the connectedBluetooth headset. When Bluetooth or the Bluetooth headset isturned off, the call is routed through either theearpiece or speaker and shows ( ).WARNING: Because of higher volume levels, do not placethe device near your ear during speakerphoneuse.Note: If Mute is activated, the speaker mode is deactivated.Note: The Headset button is activated to show the current callis routed to the connected Bluetooth headset.SPH-D700.book Page 60 Tuesday, August 17, 2010 11:14 AM
