Section 2A: Your PCS Vision Phone - The Basics 19Making and Answering CallsMaking CallsPlacing a call from your PCS Phone is as easy as making a call fromany land line phone. Just enter the number and press andyou’re on your way to clear calls.To make a call using your keypad:1. Make sure your phone is on.2. Enter a phone number. (If you make a mistake while dialing,press to erase one digit at a time. Press and hold toerase the entire number.)3. Press . (To make a call when you are roaming andCall Guard is enabled, press and then . See “CallGuard” on page 54.)4. Press or close the phone when you are finished.You can also place calls from your PCS Phone by using PCS VoiceCommandSM(page 136), Speed Dialing numbers from your PhoneBook (page 25), and using your Call History listings (page 70).Tip: To redial your last outgoing call, press TALK twice.When making calls off the Sprint Nationwide PCS Network, always dialusing 11 digits (1 + area code + phone number).Tip: To speed dial a phone number from standby mode, press and hold thespeed dial number. If the speed dial number is two digits, enter the firstdigit, then press and hold the second digit. (For information on setting upspeed dial numbers, see “Assigning Speed Dial Numbers” on page 76.)(This feature will not work when you are roaming off the SprintNationwide PCS Network; when roaming you must dial using elevendigits [1 + the area code + the seven-digit phone number.])
