Samsung SPHI300SS Tips/troubleshooting Manual

Also see for SPH-I300: Owner's manual User guide

Contents

Samsung SPHI300SS Tips/troubleshooting Manual Manual pdf 17 page image

Common Problems 17Operating SystemsQuestion: When my laptop is plugged into a dockingstation, the i330 performs a HotSync. When the laptop isremoved, the i330 will not perform a HotSync?Answer: Many laptop’s and docking stations assigndifferent COM ports when they are connected andunconnected based on the user profile. To check theCOM port setting, go to Start/Settings/Control Panel/System/Hardware/Device Manager/Ports. The currentCOM port setting will be indicated for the SamsungUSB-to-Serial Device. Check the Local Settings inHotSync and make sure that the COM port is set to thecorrect COM port. To check the settings in HotSync,right click on the Hotsync icon in the system tray, selectSetup and click on the Local tab. Click to drop down theSetting bar and select the port indicated by the DeviceManager setting listed above. If you are using a newerversion of Windows, a service pack may need to bedownloaded from Microsoft and installed to avoid anyother problems with the USB port.Question: Can I set up new entries or modify the existingentry in the Palm OS Network Panel?Answer: NO! Access to the Internet is via the Sprint PCSVision network; the setup/configuration in the SprintPCS Network Panel entry should not be modified in anyway, or else you may no longer be able to access thenetwork. Please note that if you change your Visionpassword on the Sprint PCS website, the password in theNetwork Panel is automatically updated wirelessly! Unlikeprevious Palm OS devices, any devices enabled on thePCS Vision network cannot dial out through thenetwork, so although it is physically possible to set up a