Phone BasicsSection 2A. Phone Basics 23 Hard Pause: Enter digits and then use this feature toenter a hard pause within a number string (thephone waits for your input). To continue dialing, youmust press the key. (See “Dialing and SavingPhone Numbers With Pauses” on page 29.) 2sec Pause: Enter digits and then use this feature toenter a 2 second delay within a number string (thephone continues dialing after 2 seconds without anyadditional keys being pressed). (See “Dialing andSaving Phone Numbers With Pauses” on page 29.)Answering Calls1. Make sure your phone is on. (If your phone is off,incoming calls go to voicemail.)2. Press to answer an incoming call. (Dependingon your settings, you may also answer incomingcalls by pressing any number key. See “CallAnswer Mode” on page 59 for more information.)Your phone notifies you of incoming calls in thefollowing ways: The phone rings or vibrates. The backlight illuminates. The screen displays an incoming call message.If the incoming call is from a number stored in yourContacts, the entry’s name is displayed. The caller’sphone number may also be displayed, if available.Tip To speed dial a phone number from standby mode,press and hold the speed dial number. If the speeddial number is two digits, enter the first digit, and thenpress and hold the second digit. (For information onsetting up speed dial numbers, see “AssigningSpeed Dial Numbers” on page 81.) (This feature willnot work when you are roaming off the SprintNational Network; when roaming you must dial usingeleven digits [1 + the area code + the seven-digitphone number].)Sprint M630.book Page 23 Thursday, January 8, 2009 10:33 AM
