Settings 125 WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router orother equipment. WPN PIN entry (not configurable): View the PIN used by your phone to set up aPIN-secured connection to a Wi-Fi router or other equipment. Help: Learn about setting up and using Wi-Fi networks, and other settings.Wi-Fi DirectWi-Fi Direct allows devices to connect to each other directly via Wi-Fi, without a Wi-Fi networkor hotspot, and without having to set up the connection. For example, your phone can use Wi-FiDirect to share photos, contacts and other content with other Wi-Fi Direct devices.1. Press and tap > Settings > Connections tab.2. Tap Wi-Fi, and then tap the ON/OFF switch beside Wi-Fi to turn Wi-Fi on. Wi-Fi must beon to configure Wi-Fi Direct settings.3. Tap Wi-Fi Direct at the bottom of the screen. Your phone automatically scans for nearbyWi-Fi Direct devices, or you can tap Scan to start scanning.4. After scanning for devices, select a device, then follow the prompts to complete theconnection.– or –Touch Multi-connect to create a connection to devices that support multi-connect.Touch Scan to search for available multi-connect devices, then select the devices andfollow the prompts to complete the connection.Hotspot SettingsUse your phone as an Internet Access Point (AP) using Hotspot. This allows up to eight otherdevices to connect to the AP via a Wi-Fi network—giving the connected devices access to theInternet. For more information on using your phone as a Hotspot, see Hotspot.Turn On Hotspot1. Press and tap > Settings > Connections tab > Hotspot.2. Tap OFF/ON to enable Hotspot. The Hotspot icon is displayed on the Status bar.Settings1. Press and tap > Settings > Connections tab > Hotspot.2. Tap OFF/ON to enable Hotspot. The Hotspot icon is displayed on the Status bar.